13 Best Full-Face Motorcycle Helmet Reviews

Full-face motorcycle helmets are considered the safest helmets. This is because they provide most coverage around your head, face, and neck. 

You can wear these helmets with any type of motorcycle. If you are riding on the track, you can get the full-face helmet with a higher chin bar. And if you ride in an upright position, you can get one with a lower chin bar. 

We have jotted down some of the best full-face motorcycle helmets that we think you should consider if you are looking to buy one.

Best Full Face Helmets Comparison Table

Shoei RF-1200 Helmet
Shoei RF-1200 Helmet
  • Features: Dual density EPS liner | Superior ventilation | Emergency Quick-Release System | 3D Max-Dry System II Liner | Neatly secure chin strap | Four shell sizes | Includes Pinlock pins and lens insert | Snell M2015 and DOT Certified
  • Read More
Shoei GT-Air Helmet
Shoei GT-Air Helmet
  • Features: Multi-piece EPS liner | 3-D Max-Dry center pad | Emergency Quick-Release System | Built-in QSV-1 sun shield | Four shell sizes | Eyeglass compatible interior | Ultra-lightweight, rigid and resilient | DOT Certified
  • Read More
HJC CL-17 Helmet
HJC CL-17 Helmet
  • Features: Advanced polycarbonate shell | RapidFire Shield Replacement System | Advanced Channeling Ventilation System | Pinlock-ready | SuperCool Interior | Integrated air deflector | DOT and Snell 2015 Certified
  • Read More
AGV K3 SV Helmet
AGV K3 SV Helmet
  • Features: HIR-TH Shell Construction | Optimized using FEM System | XQRS Visor Mechanism | Integrated Sun Visor | Double-D ring chin strap | Dry-Comfort liner | DOT certified
  • Read More
Bell Bullitt Helmet
Bell Bullitt Helmet
  • Features: Ultra low-profile fiber shell | Multi-Density EPS liner | Suede interior with Leather trims | Padded chin strap | 3D Cut cheek pads | Five Years Warranty | DOT and ECE Certified
  • Read More
Bell Qualifier DLX MIPS Helmet
Bell Qualifier DLX MIPS Helmet
  • Features: Multi-Directional Impact Protection | Lightweight polycarbonate shell | Adjustable ventilation system | Moisture-wicking interior | Contoured cheek pads | Integrated speaker pockets | DOT and ECE certified
  • Read More
Arai Corsair X Helmet
Arai Corsair X Helmet
  • Features: Arai’s R75 shell | Variable Axis System | VAS shield latch system | PB SNC2 Shell | Diffuser Type 12 | VAS MAX Vision shield | Snell 2020 and DOT approved
  • Read More
Schuberth S2 Helmet
Schuberth S2 Helmet
  • Features: Lightweight Triple Matrix Shell | Hypo-allergenic microfiber line | Extremely quiet | Anti-Roll-Off-System | Integrated FM and Bluetooth receiver | Hign-end Performance | ECE and DOT Certified
  • Read More
Scorpion EXO-T510 Helmet
Scorpion EXO-T510 Helmet
  • Features: Premium polycarbonate shell | EverClear No Fog face shield | AirFit Liner Inflation System | KwikWick II Liner Fabric | 5 year warranty | 3 shell sizes | DOT certified
  • Read More
  • Features: Thermoplastic shell | Bamboo fiber interior | LED illumination | 5 hour LED run time | USB charging cable included | Easy Fit glasses | ECE & DOT Certified
  • Read More
Simpson M30 Bandit Helmet
Simpson M30 Bandit Helmet
  • Features: Classic Simpson M30 styling | CoolMax lined fabric | Free Stop pivot system | Low overall weight | Two shell sizes | Also offers tons of ventilation | DOT Certified
  • Read More
BILT Raptor Helmet
BILT Raptor Helmet
  • Features: Ultra hi-tech Shell | Quality metallic paint | Quick release face shield | Drop-down sun visor | Removable airflow comfort | Double D-ring safety | DOT and ECE Certified
  • Read More
ICON Airmada Helmet
ICON Airmada Helmet
  • Features: Injection molded shell | Fog-free ICON optics | Rapid-Release shield | HYDRADRY moisture-wicking interior | Fully removable, washable | Five-year warranty | DOT, ECE, SAI & SG Certified
  • Read More

13 Full Face Helmet Reviews

Following are the reviews for full best face motorcycle helmets that are listed above;

1. SHOEI RF-1200 – Best Full Face Helmet

SHOEI RF-1200 - Full Face Helmet

SHOEI is a Japanese brand and they are known for producing excellent quality of Full Face Helmets. The Shoei RF-1200 Helmet is a do it all helmet. It’s lightweight and low-profile design has made it the people’s choice.

It uses an AIM+ (Advanced Integrated Matrix) shell construction, making it very strong and lightweight. It has both DOT and SNELL certifications, so you can wear it almost anywhere. Whether you are on a track or street, this helmet would do the job well.

Talking about the safety features, it also packs the Emergency Quick Release Cheek Pads. In case of any emergency, this feature would allow you to quickly take the helmet off without causing any further harm.

It has a fantastic aerodynamic design and an excellent ventilation system. It has a couple of active vents on the front and a massive exhaust vent at the helmet’s back. Moreover, suppose you are a person who likes to communicate on the go. In that case, this helmet also offers cut-outs for a Bluetooth communication system.

The helmet’s internal shape is an intermediate oval, which means that it is a bit longer from front and back. The face shield of the helmet can be adjusted on different levels and can support a pin lock mechanism.

You get a fully removable and washable inner liner so that you can keep this helmet fresh for the time of its life. Overall, the Shoei RF-1200 is one of the best motorcycle helmets. It packs every feature that a motorcyclist demands.

  • Best bang for the buck
  • Low profile design
  • Excellent Sound suppression
  • Safe
  • Cannot wear glasses comfortably

2. SHOEI GT-Air – Comfortable Helmet

SHOEI GT-Air - Comfortable Helmet

The Shoei GT-Air is a full-face sport-touring motorcycle helmet. That is why it packs an integrated drop-down sun visor. It is a QSV-1 sun visor which is very easy to operate and blocks almost all the UV radiation coming from the sun.

This helmet has an aggressive look to it. The helmet’s designs and cut-outs help give that aggressive look and make the helmet super aerodynamic. The ventilation system of the helmet has been improved. Shoei has used a shuttering mechanism, which allows you to adjust the vents in three different positions, fully open, half-open, and closed. It is an excellent implementation that can be easily operated with a gloved hand.

Shoei has used a perfect inner liner to cut down that wind noise. Instead of a single-wall gasket, they have used a double-wall gasket to provide a better seal against the face shield. The inner liner is very comfortable and can be removed for cleaning purposes. It uses a 3D Max-Dry comfort liner and polyurethane cheek pads, which help in sucking that sweat and keeping you fresh and cool.

The GT-Air uses high-performance fiber materials to construct its shell, which makes it rigid and durable. Shoei tested this helmet using wind-tunnel testing in Japan which aided this helmet in getting the DOT certification.

All things considered, the Shoei GT-Air caters to the present-day riders’ needs, allowing them to enjoy the ride. It offers pretty much everything that a best full face helmet should have.

  • Aerodynamic design
  • Good ventilation
  • Comfortable (suitable for wearing glasses)
  • Speaker cut-outs
  • Slightly expensive
  • Slightly heavy

3. HJC CL-17 – Certified Full Face Motorcycle Helmet

HJC CL-17 - Full Face Motorcycle Helmet

The HJC CL-17 is a budget motorcycle helmet that is DOT and SNELL-certified. It has a neutral to round shape, which would fit perfectly for people with big heads.

HJC has used an Advanced Channelling Ventilation System that allows air to circulate inside the helmet. Additionally, there are substantial passive vents at the helmet’s back, which flush all this air out.

It uses a high-quality polycarbonate material for the construction of its shell. For the helmet’s internals, it uses an anti-bacterial moisture-wicking fabric to keep you cool and fresh.

The helmet’s face shield is an anti-scratch Pin lock-ready face shield, which also provides 95% protection from UV radiation. Moreover, it also uses a Rapid-Fire shield replacement system, a tool-less ultra-quick shield removal, and installation system.

Overall, the CL-17 is an excellent choice for a person who wants some features of a premium helmet and is unwilling to break the bank.

  • Budget-friendly
  • Comfortable
  • Good airflow
  • DOT and SNELL certified
  • A bit on the heavier side

4. AGV K3 SV – Sports Helmet

AGV K3 SV - Sports Helmet

The AGV K3 SV is the successor to the old K3 helmet. In this new version, they have used their modern design to make it more aerodynamic and stable. It falls under the cheap full-face motorcycle helmet category.

It is an aggressive sports-oriented helmet with the convenience of an internal sun visor. It is designed for the three-quarter to full tuck riding position. The shell of the helmet has been made from polycarbonate, keeping it lightweight yet strong. And it would fit people with an intermediate oval head shape.

The internals of the helmet pack integrated neck roll and cheek pads, which are also made from Dry-Comfort technology. This helps you to stay dry and cool during a humid condition.

Moreover, the K3 SV also comes with a drop-down sun visor and a Parametrical Visor Shield that provides an excellent seal. For ventilation, this helmet features six air vents. Four at the front and two exhaust vents at the back.

So, if you are looking for a helmet that has a superior design and provides you with premium features for a fraction of the price, then you should go for it.

  • Pretty good helmet for the price
  • Integrated drop-down sun visor
  • ECE and DOT certified
  • Comfortable fit
  • Sound suppression is not that great
  • No separate speaker pockets

5. BELL Bullitt – Retro Full Face Helmet

BELL Bullitt - Retro Full Face Helmet

We have been wearing full-face helmets for quite a while now, but the Bell Bullitt was a game-changer when it was released in the 60s. At that time, the Bullitt brought in a cool design and improved safety standards. It has a great retro design and can be used as a full-face cruiser helmet.

Bell Bullitt falls under the premium helmet category. It has been made from high-quality materials featuring a fiberglass composite shell and leather interior. It has a retro design; therefore, it would not be much aerodynamic. There is a huge face shield that provides the widest field of view in a full-face helmet. And to keep that huge face shield shut, BELL has used a Magnefusion Shield Closure System. What this system does is it uses a small strap that sticks to the helmet with a magnet.

Moreover, the face shields that can be used with this helmet have two designs. One with a flat face and the other with a bubble face. The bubble face shield helps in better ventilation, while the flat one provides better viewing angles. However, there is a slight drawback. The helmet does not have a gasket; therefore, you can expect some noise or rain to make its way inside.

Talking about the inside, BELL has used leather trims and micro-suede lining. It is one of the most comfortable helmets to wear. Just like other premium helmets, the inners are entirely removable and washable so that you can keep that leather fresh for the time of the helmet’s life. However, all these premium materials do not help in making the helmet soundproof. You might want to wear some earplugs while riding.

If you are interested in a motorcycle helmet with a nice retro feel, packs some amazing modern features, and is DOT and ECE approved. The BELL Bullitt is an excellent choice.

  • Classy retro design
  • Luxurious
  • DOT and ECE certified
  • Good ventilation
  • Excellent field of view
  • A bit noisy
  • Poorly sealed

6. BELL Qualifier DLX MIPS – Sport Touring Helmet

BELL Qualifier DLX MIPS - Sport Touring Helmet

This Bell Qualifier DLX MIPS is a sport-oriented motorcycle helmet. It is the successor to the Bell Qualifier, which is an entry-level helmet, but this DLX MIPS is more feature-rich. Bell has used the MIPS technology, which increases the protection scheme as compared to its predecessor.

What this MIPS technology does is that it allows your head to slide a little within your helmet in a rotational type of impact. In this way, the pressure that is applied to your head during the impact gets distributed. It is a very cool feature that minimizes the chances of brain injury.

The helmet also has an external pocket on the shell’s left side to house a Bluetooth communication system. But if you are a person who thinks that inserting an external Bluetooth device would make your helmet bulky, then check out this article on the best Bluetooth motorcycle helmets.

Along with these features, Bell has also packed a transitional face shield in this motorcycle helmet. This photochromic face shield would go dark in the sunlight and clear in the shade.

On the inside, it has an anti-microbial, fully removable liner system, which can be replaced and washed. There are four active vents on the front of the helmet and a passive exhaust vent at the back. Also, some pronounced lines in the helmet’s design make it very aerodynamic. So, someday if you decide to do a little off-roading then you can also use this as a full-face dirt bike helmet.

For those of you who want a sport touring helmet with the versatility of adding a communication system and are both DOT and ECE certified, then the Bell Qualifier DLX MIPS is what you should be examining.

  • Nice safety features
  • Good helmet for the money
  • Good field of vision
  • Noisy

7. Arai Corsair X – Quietest Full-Face Helmet

Arai Corsair X - Quietest Full Face Helmet

The Corsair X is Arai’s top-of-the-line sports bike helmet. It is an updated version of the Corsair V helmet, more of an evolution. According to Arai, they have redesigned the helmet shell so that it glances off the surface better than other helmets. The engineers call it “R75“. The shell’s construction still uses composite fibers, but the inner resign has been changed, which helped them save an extra ounce or so.

The significant change that has been made is the positioning and redesign of the side pod and face shield. It used to be a nightmare if the side pod of the helmet popped out. However, in this upgrade, the whole pivot mechanism has been changed. It now corporates a quick-release system that lets the side pod open with a slight push of the tab. Moreover, the side pod does not fall away from the helmet. It hangs with an attachment, so it does not get misplaced.

The face shield has a nice wide angle that helps in spotting traffic pulling alongside. It is pin lock ready and comes with an Anti-Fog Max Vision insert.

One of the strong points of this helmet is its ventilation. There are six air vents in the front and seven exhaust vents at the back. The more extended upper vent now allows 11% more air to pass through. Although, most of these vents are adjustable, which gives you the ability to control the airflow according to your liking.

Like other top-of-the-line helmets, it features a removable lining that is, of course, washable. But apart from that, the lining is also adjustable from cheeks, temples, and skulls. It has removable panels that allow you to tweak the fit and get it right for you.

As one of the best full-face helmets, it packs all the safety features that a helmet of this tier should. Like, as Snell M2015 and DOT certifications, SHARP 5-star rating, FIM MotoGP Homologation, EQRS system, an improved shell design, and construction.

  • Safest Motorcycle Helmet
  • Very Comfortable and Customizable
  • Plenty of airflow
  • Good Sound Suppression
  • A bit on the expensive side

8. Schuberth S2 – Full Face Helmet With Bluetooth

Schuberth S2 - Full Face Helmet With Bluetooth

Schuberth is a German brand that produces helmets for the Ferrari F1 team. The Schuberth S2 is a full-face helmet with an internal sun visor and useful design features. It has been aimed to serve the purpose of city riding, touring, and sport riding.

The significant change that has been made is the positioning and redesign of the side pod and face shield. It used to be a nightmare if the side pod of the helmet popped out. However, in this upgrade, the whole pivot mechanism has been changed. It now corporates a quick-release system that lets the side pod open with a slight push of the tab. Moreover, the side pod does not fall away from the helmet. It hangs with an attachment, so it does not get misplaced.

The helmet’s shell is made from S.T.R.O.N.G. fibers, which Schuberth claims are a combination of different molded fibers to produce resilient and lighter material. This helmet has been designed on the wind tunnel to account for better aerodynamics and ventilation. The new front spoiler forces the air to flow upwards, providing the helmet with enough downforce for better stability.

For acoustics, Schuberth claims that this helmet is quiet, less than 85db at 65 mph. Moreover, you can also check out our complete guide on how to make your motorcycle helmets quieter.

The inner liner of the S2 helmet has also been updated. It now comes with flaps, which can block the chimney vents for better noise suppression. Other than that, it comes with an integrated antenna that improves the range and reception of Bluetooth devices.

It uses COOLMAX technology, which provides a comfortable and allergen-free ride. The face shield is pin lock ready, but the chin vent has been designed to not let the shield get foggy even without the pin lock attached.

To enhance this helmet’s safety features, Schuberth developed the AROS (Anti Roll Off System) feature. What this feature does is that it prevents the helmet from rotating off the head from the back. More braces have been added to the chin strap to make the grip firmer. Both ECE and DOT approved this helmet, but it only got a 3 / 5-star rating from the SHARP test.

  • Quiet
  • Lightweight
  • Nice Fit
  • Feature Rich
  • Its feature-rich but not the best bang for the buck

9. Scorpion EXO T510 – Affordable Helmet

Scorpion EXO T510 - Affordable Helmet

The Scorpion EXO T510 packs a whole bunch of features at only a fraction of the cost. It’s a touring-style helmet with an internal sun visor and increased ventilation, but the looks of it are very aggressive.

On the top of the helmet, it has one big chimney vent and two rocker-style vents. And on the chin, there is also a three-positioned vent. However, the more there are holes in the helmet, the greater are chances for noise inside the helmet. And that is what you would consider from the helmet at this price point. But shockingly, it performs on par with other premium helmets with reasonable noise levels.

The best part is that it features the Air-Fit inflation system. This system allows you to have a personalized fit by blowing air into the helmet’s liner. There is a button inside the chin area that lets you fiddle with the Air-Fit mechanism.

The EXO T510 comes with a drop-down sun visor and an Everclear No-Fog face shield. The inner liner is the KwikWick II liner, which is both anti-microbial and removable. Moreover, the KwikFit cheek pads allow you to have a comfortable fit even with the glasses on.

The shell is made of premium polycarbonate to minimize the dispersion impact, which helps this helmet get a DOT certification. As mentioned earlier, the Scorpion EXO T510 teaches us not to judge a book by its cover or price.

  • Best value for money
  • Include most premium features
  • Very high quality
  • Some parts are made from cheap plastic
  • Got some whistling noise

10. SHARK SKWAL – Cool Motorcycle Helmet

SHARK SKWAL - Cool Motorcycle Helmet

The Shark SKWAL is one of the cool motorcycle helmets with built-in LEDs that make you prominent on the road. It is an excellent helmet with decent build quality targeting people who ride at high speeds and are concerned about ventilation and acoustics. Its comfortable build makes it a viable option for women too who are looking for a full-face helmet.

To block that unnecessary air out, Shark has used their Autoseal system. In this system, the face shield pushes firmly against the gasket, providing a better seal. Moreover, there is a nice chin curtain that adds up in blocking the noise.

For ventilation, Shark has not used anything fancy. They have a single chin vent and a big chimney vent that works well in keeping you cool and ventilated.

As the most prominent feature of this helmet is its lighting. It has LEDs baked into its chin vent, chimney vent, and back exhausts. These LEDs can be controlled by a button hidden on the neck roll of the helmet. You can adjust these LEDs in two different configurations, i.e., continuous mode and pulse mode. They can be used for 5 hours in continuous mode and 10 hours in pulse mode. And when they run out of battery, you can charge them with a micro USB port attached to the helmet. It can also be used for kids, as kid’s motorcycle helmets should have some indicators so that we can keep them in sight.

The face shield of the system is easily removable. You just have to give it a slight pull. Similarly, while putting it back, just give it a slight push. But changing face shields would not be required in this helmet because it already has an integrated sun visor. So, carrying an additional smoked face shield would not be necessary.

The Shark SKWAL has a thermoplastic shell and a comfortable bamboo-fit interior. It has some good padding that allows your glasses to fit in. And if we talk about certification, it is both ECE and DOT certified.

So, there you have it, the SKWAL helps you to stay focused on the road and keeps the world focused on you.

  • Nice built-in LEDs
  • Good Fit
  • Plush Interior
  • Even though the face shield is easy to install and remove, but the clippings are not too strong

11. Simpson M30 Bandit – Full Face Cruiser Helmet

Simpson M30 Bandit - Full Face Cruiser Helmet

The Simpson motorcycle helmet manufacturing company has been in the market since the 70s, and they have very distinct styles. The Simpson M30 gives a vintage moto look with some modern features baked in. It is one of the retro motorcycle helmets whose design has not been changed since its inception.

The shell of the helmet is a fiberglass composite making it incredibly lightweight. But do note that it will fit the people with round, oval head shapes. The M30 has the roundest look, and to keep that look, Simpson had to compromise on the ventilation. It only has chin vents and side whisker-style vents for ventilation. Therefore, it might not be a suitable helmet for the hottest climates.

The interior of this motorcycle full-face helmet offers the comfortable COOLMAX fabric liner, which is moisture-wicking and removable. The face shield uses the FreeStop pivot mechanism that will allow you to adjust the face shield at any angle.

Whether you cruise on a Harley Davidson or a Cafe Racer, the Simpson M30 Bandit would be perfect for riders with a rounder head shape and who are interested in classic-style helmets.

  • Lightweight
  • DOT approved
  • Low profile design
  • Poor ventilation

12. BILT Raptor – Low Profile Helmet

BILT Raptor - Low Profile Helmet

The BILT Raptor is an excellent option for those of you who are looking for an aggressively shaped, sport or touring-styled helmet with an internal sun visor. It comes with DOT and ECE certifications and has great aerodynamic properties.

The shell is made from ultra-high-tech injection-molded polycarbonate that makes the helmet sturdier. There are prominent air vents in front of the helmet that do their job well. While on the inside, it houses a drop-down sun visor, which is easy to operate with a sliding mechanism.

The guts of the helmet are removable and washable, allowing you to keep the helmet fresh to the time of its life.

However, if you want to insert some speakers in the helmet, then there are no proper cut-outs for those. You might have to adjust them manually.

Overall, it is a magnificent full-face visor helmet that offers cool features for the price.

  • Reasonable Price
  • Good Fit
  • Good air flow
  • It offers good airflow, but then it also becomes a little noisy

13. ICON Airmada – DOT-Approved Helmet

ICON Airmada - DOT Approved Helme

The Icon Airmada has been designed for better performance while you are on the streets or on track. It has been redesigned for comfort, fit, aerodynamics, and design perspective.

The fit of the helmet is more of a sports fit; it’s more contoured around the face. It is not an easy on, easy off helmet because it is focused on performance. This bad boy is not going anywhere even if you are riding at 120 mph so, feel confident using it as a full-face street bike helmet.

For ventilation, there are seven intakes and seven exhausts at the back. From our point of view, this is a very nice feature. Because on one side, the Airmada gives you an acceptable tight fit, but along with that, there is enough ventilation, so you don’t get claustrophobic.

Icon has used its new Icon Optics face shield that provides 5% more field of view. In addition to that, this face shield is also anti-fog and U.V. resistant. Moreover, this helmet’s face shield change mechanism is the easiest one of all other helmets. You just have to slide it a little, and boom! The face shield pops out. Very fast and easy!

The helmet meets almost all the safety standards, DOT, ECE, SAI, and SG. If you are a rider who enjoys high speeds, then the Airmada would be the right choice that does not compromise safety features.

  • Great Value
  • Excellent Airflow
  • Awesome safety features
  • Tight fit

Final Thoughts

The above-addressed best full-face motorcycle helmets are the most unique and well-known models in design, comfort, or utility. However, all these motorsport-approved headgear possess features that other helmet brands do not provide for their buyers’ needs.

If you’re looking for something with excellent ventilation, the Arai Corsair X Helmet should be your go-to. If not and instead want a trendy style helmet that will make head turners everywhere in sight then try either the Bell Bullitt Helmet or one of these other options:

The Simpson M30 Bandit Helmet – A stylish new take on an old favorite; The SHARK SKWAL Helmet! Finally, there’s also the newest addition to their lineup: The Shoei RF-1200 Helmet makes sure every man knows where he stands


Are full-face helmets safer?

Full-face helmets are the most common type of helmet used by motorcycle riders in many countries. They offer better protection because they provide complete coverage to the rider’s head, protecting it from frontal impacts and reducing injuries associated with them. There are other types of helmets available for motorcyclists, but full-face helmets have become so popular that it is difficult to find one without this feature. Research shows that wearing a helmet will significantly reduce your risk of injury or death; however, you should still take precautions while riding regardless if you wear one or not.

How tight should a full-face helmet be?

A correctly sized full-face helmet should feel snug on your head and shouldn’t move back or forth when you shake it upside down. If the front of this safety equipment is sitting too high from where eyebrows would naturally grow, then that means one thing: This may be a little tight for someone with larger-than-average capacity heads!

How do you break in a full-face helmet?

Wear the helmet as often as possible when not riding, but make sure that it is only for short periods. Put some pressure on your head with something soft and cushioned to help more quickly loosen any padding materials inside of a motorcycle helmet so you can wear them without feeling uncomfortable or prone to blisters over long-term use